Friday, April 24, 2020

Price Ceiling free essay sample

A price ceiling is a government-imposed limit on the price charged for a product. Governments intend price ceilings to protect consumers from conditions that could make necessary commodities unattainable. However, a price ceiling can cause problems if imposed for a long period without controlled rationing. Price ceilings can produce negative results when the correct solution would have been to increase supply. Misuse occurs when a government misdiagnoses a price as too high when the real problem is that the supply is too low. In an unregulated market economy price ceilings do not exist. Students may incorrectly perceive a price ceiling as being on top of a supply and demand curve when in fact; an effective price ceiling is positioned below the equilibrium position on the graph. Effects of Price Ceilings Binding Versus Non-Binding price ceilings A price ceiling can be set above or below the free-market equilibrium price. For a price ceiling to be effective, it must differ from the free market price. We will write a custom essay sample on Price Ceiling or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page In the graph at right, the supply and demand curves intersect to determine the free-market quantity and price. The dashed line represents a price ceiling set above the free-market price, called a non-binding price ceiling. In this case, the ceiling has no practical effect. The government has mandated a maximum price, but the market price is established well below that. In contrast, the solid green line is a price ceiling set below the free market price, called a binding price ceiling. In this case, the price ceiling has a measurable impact on the market. Consequences of Binding Price Ceilings A price ceiling set below the free-market price has several effects. Suppliers find they cant charge what they had been. As a result, some suppliers drop out of the market. This reduces supply. Meanwhile, consumers find they can now buy the product for less, so quantity demanded increases. These two actions cause quantity demanded to exceed quantity supplied, which causes a shortage—unless rationing or other consumption controls are enforced. It can also lead to various forms of non-price competition so supply can meet demand. Reduction in quality To supply demand at the legal price, the most obvious approach is to lower costs. However, in most cases, lower costs mean lower quality. During World War II, for example, food sellers operating under ceilings reduced portion size and used less expensive ingredients (e. g. , more fat, flour, etc. ). It can also be seen in decreased maintenance of rent controlled apartments. Some scholars, however, doubt that price ceilings necessarily drive quality down in the case of an oligopoly. They argued that with few competing firms selling under a price ceiling, a company at the lower end of the market must find ways to achieve better quality without raising price. Black markets If somebody cannot obtain needed goods because a price ceiling reduces the quantity, they may turn to the black market. Those who—by luck or good management—obtain goods in short supply can profit by illegally selling at a higher price than the free market allows. The black market price is higher than the free market price because the quantity is less than in a free market transaction, where more sellers could afford to sell the product. People are sometimes forced to buy at these higher prices when a shortage happens and there is no other place to obtain these.

Tuesday, March 17, 2020

Outsourcing Seats to Turkey

Outsourcing Seats to Turkey Introduction The purpose of this paper is to analyze the influence of outsourcing on VDL Group’s supply chain strategy and processes. In addition, a plan to outsource CAD conversion services to Outsource2india will be presented.Advertising We will write a custom coursework sample on Outsourcing Seats to Turkey specifically for you for only $16.05 $11/page Learn More Outsourcing refers to the process of â€Å"contracting with a third-party service provider for the management and completion of a certain amount of work, for a specified length of time, cost, and level of services† (Oshri, Kotlarsky Willcocks 2009, p. 4). The main objective of outsourcing is to enable companies to improve their competitiveness through cost reduction, economies of scale, and flexibility in production (Varadarajan 2008, pp. 1165-1172). VDL is a manufacturing company that was founded in the Netherlands in 1953. The company is organized into four divisions namely, subc ontracting, car assembly, bus/ coach, and finished products (VDL 2014). The subcontracting division specializes in mechatronic systems, manufacturing plastics, and surface treatment. The car assembly division produces cars on behalf of other companies. The bus and coach division produces coaches and buses. The finished product division produces several products, which include car suspension systems, heating systems, and production automation systems (VDL 2014). Overall, the group consists of 81 operating companies that specialize in the production of specific products. The group has operations in 18 countries where it employs over 9,100 employees. In 2012, the company realized 1,756 million Euros in revenues (VDL 2014). Impact of Outsourcing VDL has outsourced production of the seats for its cars and buses to a Turkish company referred to as Brusa Seating. Brusa Seating specializes in the design, development, and production of seats, which it sells to original manufacturers of comme rcial vehicles (Brusa 2014). Outsourcing has had the following impacts on VDL. First, outsourcing has enabled the company to adjust the scale and scope of its production capability at a low cost. Given the high competition in the automobile industry, manufacturing companies have had to adopt lean production technologies in order to reduce operating costs. One of the strategies being used by VDL is to produce cars and buses on demand. This means that the company has to adjust its production capacity frequently in order to satisfy existing demand without holding unnecessary inventory or stock of completed buses/ cars. When the demand for buses is high, the company simply increases its order for new seats. This leads to cost savings since the company does not have to invest in new production systems or inventory to produce more seats (Williamson 2008, pp. 5-14). Conversely, when demand for buses is declining, the company orders for fewer seats. As a result, it avoids operating at exces s capacity, thereby eliminating the costs associated with warehousing and laying off staff during low demand seasons.Advertising Looking for coursework on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Second, outsourcing enables VDL to concentrate on its core activities, which include assembling cars and manufacturing buses. Undoubtedly, companies cannot pursue excellence in all activities in their value chain due to resource limitations (Liu Nagurney 2011, pp. 539-549). Thus, companies focus on their core competence in order to achieve a competitive advantage. In this context, core refers to the activities that are performed internally, contribute directly to the bottom line, and determine the future of the company. VDL’s core competence is in assembling cars and buses on behalf of third parties. Thus, it outsources the manufacture of car parts such as seats to third party producers where the manufact ure of car parts is a core competence. Outsourcing enables companies to focus on activities that add value to their customers (Tayauova 2012, pp. 188-195). At VDL, the value adding activities include product development, research, and provision of technical support to customers. By focusing on these activities, the company has been able to improve the quality of its products, thereby increasing sales, customer satisfaction, and market share. Finally, outsourcing enables VDL to achieve cost advantages through economies of scale. Economies of scale refer to a cost advantage that a company achieves through increased production of a given product (Belcourt 2006, pp. 269-279). Specifically, the fixed cost per unit reduces as the number of units produced rises. Outsourcing enables VDL to achieve economies of scale in several ways. To begin with, it enables the company to increase its production capacity without incurring the fixed costs associated with hiring new employees and holding lar ge inventories. Outsourcing also enables the company to improve its efficiency by purchasing seats at a favorable price. In particular, Brusa Seating has to supply the seats to VDL at a competitive price in order to maintain the outsourcing contract. Economies of scale enable VDL to reduce the average cost of producing its buses and cars, thereby improving its profit margins. Moreover, low production costs enable VDL to price its products competitively, thereby overcoming competition in the market. Risks and Benefits Benefits First, VDL benefits from access to the capabilities and the expertise of Brusa Seating. The automotive industry is capital intensive and thrives on the application of advanced technologies to achieve product and process innovation. This requires investments in modern production systems and the best talent (Gabriela Clark 2006, pp. 250-253).Advertising We will write a custom coursework sample on Outsourcing Seats to Turkey specifically for you for onl y $16.05 $11/page Learn More The automotive industry in the Netherland is underdeveloped due to its high concentration. As a result, access to talent and advanced production technologies is limited. By contrast, Turkey’s automotive industry consists of numerous large producers who have decades of experience. Thus, outsourcing enables VDL to access advanced technologies and expertise through Brusa Seating (Weidenbaum 2005, pp. 311-315). Second, the company benefits from low labor costs by outsourcing to Brusa Seating. Turkey is â€Å"an emergent market in the new millennium expected to attract the interest of global companies in their attempt to obtain competitive advantages† (Aktas et al. 2011, pp. 833-852). One of the main advantages of Turkey is low labor cost. In 2013, the average hourly labor cost in the Netherlands was $34.75, whereas in Turkey the cost was $5 (World Bank 2014). Low labor costs enable Brusa Seating to produce seats for VDL at a low cost. As a result, VDL’s overall cost of producing buses and cars will reduce in the long-run (Quelin Duhamel 2003, pp. 647-661). Third, VDL has achieved a competitive advantage in the market through outsourcing. The company has achieved a differentiation advantage by contracting Brusa Seating to manufacture its seats. As a specialized seat producer, Brusa Seating focuses on conducting research and development to produce seats that meet the specific needs of its customers. Through product innovation, Brusa Seating has been able to supply VDL with seats that offer more comfort and flexibility than those provided by other companies. Differentiation will enable VDL’s buses to penetrate the market easily. Risks First, outsourcing to a Turkish company exposes VDL to the risk of language barriers. The official language in Turkey is Turkish. Over 90% of Turkey’s population speaks Turkish. By contrast, Dutch is the official language in the Netherlands and it is used b y over 90% of the population. Only 0.06% of the Netherland’s population can speak Turkish and Arabic. This means that communication is likely to be a problem since the employees of VDL and Brusa Seating are not likely to speak the same language. Undoubtedly, language barriers cause serious challenges such as misunderstandings among business partners. This can lead to costly mistakes such as poor product development and ineffective coordination of supply chain activities (Foogooa 2008, pp. 858-864).Advertising Looking for coursework on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Second, VDL and Brusa Seating have different levels of skills, expertise, and technical infrastructure. These differences limit the ability of the two companies to collaborate through joint research and development activities. As a strategic partner, VDL has to involve Brusa Seating in its product development initiatives to meet its product quality objectives. However, collaboration during product development will be very difficult if the employees from the two companies have different levels of expertise and skills (Trott 2006, pp. 672-681). For instance, VDL’s employees may not understand the procedures that their counterparts at Brusa Seating use to manufacture seats. Lack of special skills in key areas such as management of people, contracts, and processes will limit VDL’s ability to maintain control over the quality of the seats produced by Brusa Seating (Rottman Lacity 2006, pp. 56-63). Finally, cultural differences between the two companies and their countries of origin can limit their ability work as partners. Culture is an important aspect of every business since it determines the way people think, make decisions, communicate, coordinate, and resolve conflicts. The Netherlands and Turkey have very different cultures. Turkey has a high-context culture in which individuals value reputation, politeness, and tradition rather than clarity. The Netherlands, on the other hand, has a low-context culture where people value individualism and achievement. Given these differences, employees from the two companies are likely to have different expectations about the outsourcing partnership (Barthelemy Geyer 2001, pp. 195-202). The resulting communication gaps or misunderstandings can lead to conflicts that will eventually lead to failure. Outsourcing CAD Conversion Services to Outsource2india Developing and executing an effective outsourcing plan involves following five key steps, which are summarized in figure 1. Based on this framework, VDL should consider the following plan to outsource CAD conversion services to Outsource2india Ltd. Figure 1: Framework for Outsourcing Needs Assessment CAD conversion is the process of transforming hardcopy designs into a computer aided design format to facilitate improved storage, accuracy, and easy modification. As a manufacturer, VDL requires effective CAD conversion services to improve the quality of its services. CAD conversion is a vital process that requires advanced expertise, resources, and a dedicated team of professionals. Thus, VDL will require a significant amount of financial capital and expertise to run its own CAD conversion department. This is likely to shift the focus of the company away from its core activity of assembling cars and buses (Mclvor 2008, pp. 24-34). Since CAD conversion is not a core activity, VDL can outsource tasks such as CAD digitization, conversion to MicroStation, conversion of JPG to DWG, and conversion to AutoCAD to Outsource2india (Mclvor 2008, pp. 24-34). By outsourcing these tasks to an experienced third-party, VDL will benefit from time efficiency, quality work, and better utilization of its resources (Kobelsky Robinson 2010, 105-119). In addition, the company will save the costs associated with hiring and training CAD conversion staff and the cost of operating a CAD department. Proposal and Contracting Outsource2india has core competence in providing CAD conversion services to global firms. The company has a flexible capacity to handle any scope of CAD conversion work (Outsource2india 2014). Its capability is characterized by access to high-end technologies and infrastructure, as well as, the use of the latest software. Additionally, the company has in-built redundancy, which will facilitate quick capacity adjustments in response to an increase in demand (Outsource2india 2014). Outsource2india will provide high quality CAD conversion services due to its ability to access a highly skilled workforce. As a specialist in CAD conversion services, Outsource2india has invested in employees with technical skills and expertise in various aspects of computer aided design. As a result, it will provide custom CAD conversion solutions to suit each project’s requirements. Outsource2india provides time zone benefits since the company operates 24 hours, seven days a week. Thus, VDL will benefit from quick turnaround time (Samsudin, Hasim Fuzi 2013, pp. 1-8). Moreover, VDL will save up to 50% of its operating costs due to the low labor costs in India (Outsource2india 2014). Thus, the proposal to contract Outsource2india will enable VDL to enjoy both differentiation and cost advantages (Jensen 2011, pp. 311-326). Communication and Change Management At this stage, Outsource2india will collaborate with VDL to articulate the issues associated with outsourcing CAD conversion services. The communication vehicles that will be used include VDL Group’s newsletters and meetings. The communication activities wil l be used to identify the affected stakeholders and the basis of relationship between Outsource2india and VDL (Tate Ellram 2009, pp. 256-268). In addition, the benefits of outsourcing will be explained to the affected stakeholders to motivate them to support the anticipated changes in organizational design that will occur due to outsourcing CAD conversion services (Oshri, Kotlarsky Willcocks 2009, pp. 94-112). Transition Management This stage will involve establishing the transition governance system to align the objectives and strategies of VDL to Outsource2india’s delivery system (Mani, Barua Whinston 2006, pp. 15-28). The change control process will be implemented to address emerging risks (Oshri, Kotlarsky Willcocks 2009, pp. 94-112). In addition, the timeline for completing the work and the expected deliverables will be clarified at the transition stage. Training programs will be implemented to facilitate knowledge transfer from Outsource2india to VDL. Moreover, rela tionship management initiatives will focus on promoting effective coordination of supply chain activities between Outsource2india and VDL (Oshri, Kotlarsky Willcocks 2009, pp. 94-112). Service Stabilization The transition team will be in charge of the service stabilization stage to ensure that the expected deliverables are achieved. Outsource2india will focus on delivering the CAD conversion services as required by VDL. The relationship governance structure will be used to resolve any issues that might arise during the provision of the outsourced services (Dolgui Proth 2013, pp. 6769-6777). Recommendations According to the agency theory, outsourcing contracts are likely to face significant challenges if the vendor and the client have different goals. Outsourcing is likely to fail if the client is not able to measure the vendor’s output (Ryan Delgado-Sanchez 2009, pp. 52-71). Moreover, opportunistic vendors will always take advantage of the loopholes in the outsourcing cont ract to fulfill their goals at the expense of their clients. In order to avoid these challenges, VDL should use an outcome-based contract where the vendors are paid according to their achievements. This will shift the risks associated with the contract to the vendor, thereby encouraging high productivity (Logan 2000, pp. 27-30). VDL should control vendors’ opportunistic behaviors by increasing its involvement in the production of the outsourced services. Additionally, it should hire a qualified independent consultant to audit the vendors to enhance achievement of the desired quality standards. Second, VDL should visit Brusa Seating’s premises in Turkey to inspect the adequacy of its production capacity and to identify the challenges that the company is likely to face in producing seats. This will enable VDL to identify the risks that are likely to reduce the effectiveness of its outsourcing contract with Brusa Seating in order to take timely actions (Kroes Ghosh 2009, pp. 124-143). Finally, VDL should invest in IT and communication techniques to improve its supply chain system. This involves integrating its supply chain system with those of its outsourcing partners to facilitate effective exchange of information and coordination of activities. Integration can be achieved through technologies such as cloud computing and business-to-business e-commerce platforms. Furthermore, VDL should train its employees on various languages to overcome communication challenges. This will facilitate effective communication between the company and its outsourcing partners who are based in various countries. References Aktas, E, Agaran, B, Ulengin, F Onsel, S 2011, The Use of Outsourcing Logistics: The Case of Turkey, Transportation Research Part C, vol. 19 no. 1, pp. 833-852. Barthelemy, J Geyer, D 2001, IT Outsourcing: Evidence from France and Germany, European Management, vol. 19 no. 2, pp. 195-202. Belcourt, M 2006, Outsourcing: The Benefits and the Risks, H uman Resources Management Review, vol. 16 no. 1, pp. 269-279. Brusa 2014, About Brusa, brusaseating.eu/. Dolgui, A Proth, J 2013, Outsourcing: Definitions and Analysis, International Journal of Product Research, vol. 51 no. 23, pp. 6769-6777. Foogooa, R 2008, IS Outsourcing: A Strategic Perspective, Business Process Management Journal, vol. 14 no. 6, pp. 858-864. Gabriela, K Clark, D 2006, Outsourcing to China: Risks and Benefits, Computer Law and Security Report, vol. 22 no. 2, pp. 250-253. Jensen, P 2012, A Passage to India: A Dual Case Study of Activities, Processes and Resources in Offshore Outsourcing of Advanced Services, Journal of World Business, vol. 47 no. 1, pp. 311-326. Kobelsky, K Robinson, M 2009, The Impact of Outsourcing on Information Technology Spending, International Journal of Accounting Information systems, vol. 11, no. 1, pp. 105-119. Kroes, J Ghosh, S 2009, Outsourcing Congruence with Competitive Priorities: Impact on Supply Chain and Firm Performance, Jou rnal of Operations Management, 28 no. 1, pp. 124-143. Liu, Z Nagurney, A 2011, Supply Chain Outsourcing Under Exchange Rate Risk and Competition, Omega, vol. 39 no. 1, pp. 539-549. Logan, M 2000, Using Agency Theory to Design Successful Outsourcing relationships, International Journal of Logistics Management, vol. 11 no. 2, pp. 21-31. Mani, D, Barua, A Whinston, A 2006, Successful Governing Business Process Outsourcing Relationships, MIS Quarterly Executive, vol. 5 no. 1, pp. 15-29. Mclvor, R 2008, What is the Right Outsourcing Strategy for Your Process? European Management Journal, vol. 26 no. 2, pp. 24-34. Oshri, I, Kotlarsky, J Willcocks, L 2009, The Handbook of Global Outsourcing and Offshoring, Palgrave Macmillan, Landon. Outsource2india 2014, Why Outsource2india, https://www.outsource2india.com/. Quelin, B Duamel, F 2003, Bringing Together Strategic Outsourcing and Corporate Strategy: Outsourcing Motives and Risks, European Management Journal, vol. 21 no. 5, pp. 647-661. R ottman, J Lacity, M 2006, Proven Practices for Effective Offshoring IT Work, MIT Sloan Management Review, vol. 47 no. 3, pp. 56-63. Ryan, B Delgado-Sanchez, A 2009, Outsourcing relationships: A Case of Accounting Surveillance, Journal of Accounting and Organizational Change, vol. 6 no. 1, pp. 52-71. Samsudin, N, Hasim, R Fuzi, S 2013, Electronic Government Outsourcing Issues in Malaysia, Journal of Outsourcing and Organizational Information on Management, vol. 20 no. 3, pp. 1-8. Trott, A 2006, Innovation Risks of Strategic Outsourcing, Technovation, vol. 26 no. 1, pp. 672-681. Tate, W Ellram, L 2009, Offshore Outsourcing: A Managerial Framework, Journal of Business and Industrial Marketing, vol. 23 no. 4, pp. 256-268. Tayauova, G 2012, Advantages and Disadvantages of Outsourcing: Analysis of Outsourcing Practices of Kazakhstan Banks, Procedia Social and Behavioral Sciences, vol. 41 no. 1, pp. 188-195. Varadarajan, R 2008, Outsourcing: Think More Expansively, Journal of Business Research, vol. 62 no. 2, pp. 1165-1172. VDL 2014, Profile, https://www.vdlgroep.com/nl. Weidenbaum, M 2005, Outsourcing: Pros and Cons, Business Horizon, vol. 48 no. 1, pp. 311-315. Williamson, O 2008, Outsourcing: Transaction Cost Economics and Supply Chain Management, Journal of Supply Chain Management, vol. 44 no. 2, pp. 5-14. World Bank 2014, Data Bank, worldbank.org/.

Sunday, March 1, 2020

Books About Writing

Books About Writing Books About Writing Books About Writing By Daniel Scocco I figured that it would be useful to have a page on the blog dedicated to books about writing. This initial list was created taking into consideration the books that our writers reviewed or recommended in the past. We plan to update it regularly as well. If you have a suggestion just write a comment below and we might add it. The links to Amazon are affiliate ones, so yeah if you end up purchasing the book we will earn a dollar or two. That money will be spent purchasing new books though. Enjoy. The Elements of Style: Originating as a classroom study aid prepared by Cornell English Professor William Strunk in 1918, this widely-used desk reference of English usage, form, and style continues to influence writers after a hundred years. A must have.Click here to get more details or buy. Eats, Shoots and Leaves: First published in April of 2004, Eats, Shoots and Leaves stayed 25 weeks on the New York Times bestseller list and by October of that year it had already sold one million copies. At a bit more than 200 pages including the bibliography, this little book describes the rules that govern the use of: apostrophe, comma, colon, semi-colon, dash, hyphen and period. Click here to get more details or buy. The Dictionary of Concise Writing: A must have book for anyone who wants to write better. It brings over 10,000 alternatives you can use to free your text from wordy constructions and unnecessary phrases. Click here to get more details or buy. Oxford American Writers Thesaurus: Another book worth investing in, as you will be able to use it over and over again. It comes with synonyms, antonyms, sample sentences and cross references to let you pick the most precise word for each occasion. Click here to get more details or buy. Concise Oxford English Dictionary: If you are looking for a solid dictionary and dont want to spend a fortune on it, this is a good choice. Click here to get more details or buy. On Writing: One of the best books about writing and being a writer. Stephen King is probably the most popular horror writer ever, and in this book he shares how he started, the basic writing rules and the fiction writing process. Click here to get more details or buy. The Screenwriters Bible: If want to start writing scripts, this book could help. David Trottier is a writer, producer and script consultant, and he shares tips on all the stages you will go through, from getting started to formatting and selling your script. Click here to get more details or buy. Plot Structure: This book is part of a series called Write Great Fiction. As the name implies, it will assist you while creating the plot for your stories. It comes with techniques, tips and even exercises you can use to practice what you will learn. Click here to get more details or buy. Rules for Writers: A book aimed at college students (regardless of the course). Diane Hacker, the author, has been teaching at the Prince George’s Community College for over 35 years, and this book is the result of what she learned from her students over that time. Click here to get more details or buy. On Writing Well: The subtitle says it all: The Classic Guide to Writing Nonfiction. The book covers many aspects of writing, from removing unnecessary words and phrases to identifying your audience and editing your pieces. Click here to get more details or buy. The Associated Press Stylebook: One of the most popular style guides among professional writers and journalists. The 2009 edition has been revised and contains over 3,000 new entries. Click here to get more details or buy. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Book Reviews category, check our popular posts, or choose a related post below:100 Idioms About NumbersItalicizing Foreign Words13 Theatrical Terms in Popular Usage

Friday, February 14, 2020

Advertising in the UK fastfood industry Dissertation

Advertising in the UK fastfood industry - Dissertation Example sh this aim, the study targets the following objectives: 3.1 To determine the status of fast food advertising in the UK, for the period 2003 to present (to include findings from the Hastings review and the study by the Food Standards Agency.) 3.2 To understand the cultural issues and considerations that surround fast food advertising 3.3 To draw insight as to how an understanding of cultural attributes may make the advertising of fast foods more effective and mutually beneficial for both consumers and business. 4. Statement of the research problem and sub-problems What are the cultural considerations that advertisers should take into account in promoting the fast food business in the UK? 4.1 What is the current status of fast food advertising in the UK? 4.2 With the ban imposed on advertising for children, what strategic shift in marketing should fast foods consider in targeting the adult market? 4.3 Based on the revised marketing strategy, what are the social norms, beliefs and atti tudes of adults that advertising must consider in pursuit of the new strategy? 5. Significance of the research topic The research topic is a timely and relevant issue in the United Kingdom, where in January 2007 a total ban was implemented by the Office of Communications (OFCOM) on the advertising of junk food and fast food to children. The new legislation was the result of the unrelenting campaign of parents and pressure groups, with the support of the British Medical Association, who were concerned about the worsening obesity problem besetting not only the UK but almost all developed nations. The ban covers all advertising of foods deemed to have particular appeal for children and youth under the age of sixteen. The advertising ban also comes at the end of an exhaustive three year... The research topic is a timely and relevant issue in the United Kingdom, where in January 2007 a total ban was implemented by the Office of Communications (OFCOM) on the advertising of junk food and fast food to children.   The new legislation was the result of the unrelenting campaign of parents and pressure groups, with the support of the British Medical Association, who were concerned about the worsening obesity problem besetting not only the UK but almost all developed nations.   The ban covers all advertising of foods deemed to have particular appeal for children and youth under the age of sixteen.     The advertising ban also comes at the end of an exhaustive three year research on the effects of junk food and fast food advertising on the eating habits of children, mandated by the UK government for OFCOM to undertake.   Lobbyists from either side participated, including representatives from food manufacturers who worried about revenue deterioration.   At this point, health campaigners are pushing for a furtherance of the ban to include all advertising of junk and fast foods before the watershed of 9pm.   The move had made advertisers more creative, foregoing television advertising and resorting to social networking sites and mobile phones. (Fast Food Nation, 2011).Cultural aspects of advertising.   There is current debate about the relationship between advertising and the culture in which the advertising campaign is being launched.   Many are apparently of the opinion that advertising influences those segments.

Saturday, February 1, 2020

Conflict Resolution Paper Coursework Example | Topics and Well Written Essays - 250 words

Conflict Resolution Paper - Coursework Example The message had not been replied after half an hour. I decided to write her another text message; this time round it was worse because it included abuses. Still she did not reply. After 2 hours, my anger had cooled down; I decided to call my roommate’s boyfriend to inform me why his girlfriend was not answering my message. I was shocked to learn from the boyfriend that my roommate had gone unconscious before they left the room and rushed her to a medical facility. I suddenly remembered that my roommate was epileptic. The boyfriend confessed of the mess in the room, he confessed that he was trying to look for her medical records and because of the hurry, he ended up disarranging everything. I felt so ashamed to learn that I had to confess to both my roommate and her boyfriend afterwards. If I had to find myself in the same situation in future, I would first of all wait for her to return, ask her why it happened before reacting (Van de Vliert and Euwema 679). I will never let my emotions dominate me next time I find myself in

Friday, January 24, 2020

Brave New World: Hypnopaedic Slogans :: essays research papers

Sleep teaching and mind control: hypnotism techniques used for manipulation and power over the individual. Hypnotism is not widely promoted in our society as formal education; yet, it lingers on the horizon. In Huxley's Brave New World, hypnopaedia is used to promote economic stability and control emotions of the inhabitants living in England. The economy-oriented society relies on hypnopaedia to keep consumers eager to spend by them with catchy, consume-driven phrases. For example, one slogan tells people that they "do love flying. [They] . . .do love flying" (33). A resident of London likes being high, using helicopters for all transportation, and the feeling of being safe in an indestructible machine. The gas-guzzling machines cost enormous amounts of money to keep fueled, and so the gasoline market goes up. In addition, the people believe that "ending is better than mending" (35). One is taught to do away with items instead of trying to fix them. Society encourages purchasing new, always buying more and more so as to boost the economy. Furthermore, children are taught that "the more stitches the less riches" (33). Stitching and other repairing of any kind are frowned upon, because it does not cost anything, rather, it saves money. The more one attempts to mend and keep rather than throw aw ay, the less money in circulation throughout the country and thus, the economy suffers. The prosperity of this money cycle is valued highly, and so these three jingles are sleep-taught to all. Hypnopaedic slogans focus also on encouraging emotionless bliss. For example, Lenina often says "a gramme is better than a damn" (37). Society teaches one to take a gram of soma, the drug with no after affect, to get rid of problems or worries. When people choose soma instead of dealing with problems, it promotes emotional stability throughout the nation. In addition, people learn that "one cubic centimeter cures ten gloomy sentiments"(60). One is supposed to take soma instead of feeling bad or upset about anything, which can distract the mind from other, more important matters. Instability in the workplace occurs when one has emotional stress that can take away from the quality and quantity of the work done. Furthermore, people ramble off that "was and will make me ill. I take a gramme and only am" (29). It is taught that the past and future do not matter, focusing only on the present is the correct way to be.

Thursday, January 16, 2020

In this play, suicide is an act forbidden by religion Essay

â€Å"To be, or not to be† cries a torn Hamlet in Shakespeare’s tragedy, Hamlet. This is not the first time that Hamlet reflects upon his existence and thinks about committing suicide. In this play, suicide is an act forbidden by religion and society that one may take into consideration only after stricken with unbearable grief. In Hamlet’s case, he is stuck between living a horrible life that may not seem worth living, and taking his own life to end the cruelty of it, which he claims he would if God had not made it forbidden. Subsequently, Hamlet fuels his fire to live and not follow the path of suicide by remembering his duty as a person, which for him is to avenge his murdered father before it is too late. Before we can understand Hamlet’s popular predicament to be or not to be as a whole, we must make sure that we define the concepts that are key in his situation to place ourselves in Hamlet’s depressing shoes. For one, suicide is a broad, varying act that has different meanings to different people in different times. For the people of Hamlet’s setting, it was an atrocious, intentional act that only the horrid sinners would commit against the almighty Biblical God. Even after death, the people still looked down upon the dead that did not pass naturally into the afterlife by holding a funeral that only genocidal dictator would be worthy of; one that involved throwing rubble into the pit of the dead instead of pious flowers and ornaments. Also, though, what must be considered is the situation a person might be in. For example, if you live a life that involves lying in a dreadful hospital bed with very little consciousness and no sense of elation, one might argue, from a Christian viewpoint, that it is not immoral to kill yourself. Whether or not someone believes in a supreme being, one generally has morals. Morals are a set of rules or schemas that people follow and live by which they create, edit, and alter throughout their lives. In Hamlet, we see that almost everyone holds a heavy, negative view against suicide. The play leads us to think that suicide is something that is unnatural and undeniably immoral. When Ophelia dies, many people believed it was suicide, while others assumed it was an accidental death (Act IV, scene vii). Depending upon which side they took, their culminating feelings towards Ophelia was created based on their initial assumptions. The gravediggers or clowns that spoke during Ophelia’s funeral procession question whether she will receive a proper, Christian burial, or if she will be treated like a bag of bones and skin, essentially, and be buried in an unfavorable fashion. Though the situation pointed towards suicide, Ophelia received a funeral that was Christianesque mainly because of her royal blood (Act V, scene i). This specific example from the play shows us how immoral suicide, to the people of the play, really was. Where do the roots of morals lie? The answer exists in religion. The characters of Hamlet all consider religion and the laws of it to be of utmost importance. In Hamlet, Christianity is the only religion mentioned and is followed by practically everyone. Considering most people were very religious, we can infer that they followed the rules very closely and criticized those that did not, even if it was they. In one of Hamlet’s soliloquies, we learn that one of the few things preventing Hamlet from ending his miserable life is the commandment of God. â€Å"Or that the Everlasting had not fix’d His canon ‘gainst self-slaughter!† If it were not against the will of God, Hamlet would have considered suicide even more and maybe even committed the treacherous act. Christianity condemns suicide (Act I, scene ii). The people of the play follow Christianity rigorously. Therefore, the people of the play look down upon suicide mainly because of their religious views.